Use MongoDB to Store Application Data on Fedora 14

MongoDB is a database engine that provides access to non-relational key-value databases. It is part of the growing NoSQL movement, which seeks to provide an alternative to traditional relational database management systems (RDBMS). In addition to its schema-free design and scalable architecture, MongoDB provides a JSON-based output format and specialized language specific bindings that make it particularly attractive for use in custom application development. Although MongoDB is a relatively new project and has not yet been packaged by most major operating system distributions, the software has been used in a number of large scale production deployments such as “GitHub”, “SourceForge”, and “DISQUS”.

Before installing MongoDB, it is assume that you have followed our Setting Up and Securing a Compute Instance. If you are new to Linux server administration, you may be interested in our introduction to Linux concepts guide, beginner’s guide and administration basics guide.

Installing MongoDB

Install Prerequisites

Issue the following command to ensure that your system and all installed software is up to date:

yum update

Install MongoDB

Download the latest binaries from the upstream source.; at the time of writing this is version 1.6.5. When downloading MongoDB, ensure that you download a version that is compiled for the proper system architecture. This document uses the 32-bit version; however, these steps will work for the 64-bit edition with a few modifications. Please note that the 32-bit version of MongoDB has a database size limit of 2 gigabytes. If you expect to store more than 2 gigabytes of data, ensure that you have deployed a 64-bit system and are using the 64-bit version of MongoDB.

cd /opt/
wget http://fastdl.mongodb.org/linux/mongodb-linux-i686-1.6.5.tgz
tar zxvf mongodb-linux-i686-1.6.5.tgz
mv mongodb-linux-i686-1.6.5 /opt/mongodb

MongoDB is now deployed in the /opt/mongodb/ folder with the binaries located in the /opt/mongodb/bin/ folder. In this example, it is assumed that all database files will be stored in the /srv/db/mongodb folder and that log files will be stored in the /srv/db/mongodb.log file. Issue the following commands to create this file and directory:

mkdir -p /srv/db/mongodb
touch /srv/db/mongodb.log

In this example the name of the database will be mongodb; however, you can modify this name with another name or naming scheme as needed.

Monitor for Software Updates and Security Notices

When running software compiled or installed directly from sources provided by upstream developers, you are responsible for monitoring updates, bug fixes, and security issues. After becoming aware of releases and potential issues, update your software to resolve flaws and prevent possible system compromise. Monitoring releases and maintaining up to date versions of all software is crucial for the security and integrity of a system.

Please monitor the following MongoDB mailing lists for updates to ensure that you are aware of all updates to the software and can upgrade appropriately or apply patches and recompile as needed:

• MongoDB Developers List
• MongoDB Users List

When upstream sources offer new releases, repeat the instructions for installing MongoDB and recompile your software when needed.

Create Basic Control Scripts

In typical installations, the MongoDB server process is controlled using command line arguments to the binary located at /opt/mongodb/bin/mongod. In order to simplify these commands, you can create control scripts named mongodb-start and mongodb-stop in the /opt/bin/ directory. Issue the following commands to create the required directories:

mkdir /opt/bin/
mkdir /opt/config/

Issue the following sequence of commands to download the scripts and set the permissions on these files:

cd /opt/bin/
wget -O mongodb-start http://www.linode.com/docs/assets/621-mongodb-start.sh
wget -O mongodb-stop http://www.linode.com/docs/assets/622-mongodb-stop.sh
chmod +x *

Review the contents of the mongodb-start and mongodb-stop and modify these files if your deployment requires an alternate initialization procedure. From now on, issuing /opt/bin/mongodb-start or /opt/bin/mongodb-stop will start or stop the MongoDB process, respectively. The behavior of the mongod process is controlled by the values set in /opt/config/mongodb.

Create the /opt/config/mongodb and use the following example as a template:

File: /opt/config/mongodb

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16

# Configuration Options for MongoDB # # For More Information, Consider: # - Configuration Parameters: http://www.mongodb.org/display/DOCS/Command+Line+Parameters # - File Based Configuration: http://www.mongodb.org/display/DOCS/File+Based+Configuration dbpath = /srv/db/mongodb logpath = /srv/db/mongodb.log logappend = true bind_ip = 127.0.0.1 port = 27017 fork = true auth = true # noauth = true

This specifies a number of important options that you may modify to control the functionality of mongodb. The dbpath option indicates that database files will be stored in /srv/db/mongodb. The logpath directive indicates that MongoDB’s logs will be located in the /srv/db/mongodb.log file, and that new log entries will be appended to the end of the log rather than overwriting existing log entries even after MongoDB restarts.

If the bind_ip option is not specified, MongoDB will bind to and listen for requests on all local IP addresses. In this case, MongoDB is configured to only listen for requests on the localhost interface. Modify this option to allow your MongoDB server to listen for requests on other IP addresses; however, consider the possible security implications of providing public access. The port option in this file specifies the default port, but can be modified depending on your needs.

Setting the fork option to equal true configures MongoDB to run as a daemon process in the background independently of the current user’s session. Please note that MongoDB will run under the user that executes the mongodb-start script. We strongly recommend that this user not be root or another privileged user account. To provide additional security, it is recommended that you set the auth option to true in order to take advantage of MongoDB’s internal authentication capabilities. If you need to test the database without authentication, you can replace the auth option with noauth.

Using a Basic Init Script

We’ve also created a very basic “init script” as a wrapper around the mongodb-start and mongo-stop scripts described above. You will still need to modify and manage the configuration of your MongoDB server in the files above. This script only provides a means for ensuring that MongoDB will start at boot. Issue the following commands:

wget -O init-rpm.sh http://www.linode.com/docs/assets/623-mongodb-init-rpm.sh
mv init-rpm.sh /etc/rc.d/init.d/mongodb
chmod +x /etc/rc.d/init.d/mongodb /etc/init.d/mongodb
chkconfig --add mongodb
chkconfig mongodb on

You will also need to create a user and group for mongodb; issue the following command:

useradd -M -r --home-dir /opt/mongodb mongodb

Now issue the following command to ensure that the MongoDB user you just created will have access to all required files in the /srv/db/ hierarchy:

chown mongodb:mongodb -R /srv/db/

To start and stop MongoDB using the init script, issue the appropriate command from the following:

/etc/init.d/mongodb start
/etc/init.d/mongodb stop

Congratulations, you now have a fully functional installation of the MongoDB system.

Additional MongoDB Functionality

Now that MongoDB is running properly, you can begin to explore some of its features. Most interaction with MongoDB is done via the rich set of language-specific drivers. There are also a number of tools in the /opt/mongodb/bin/ directory that you might find useful for interacting with MongoDB databases. The mongo utility provides an interactive JavaScript shell for MongoDB including commands such as mongodump and mongorestore for creating and restoring backups and snapshots as well mongoexport and mongoimportjson for exporting individual collections in JSON format.

You can now fully enjoy application development with MongoDB!

More Information

You may wish to consult the following resources for additional information on this topic. While these are provided in the hope that they will be useful, please note that we cannot vouch for the accuracy or timeliness of externally hosted materials.

• MongoDB Project
• Language-Specific MongoDB Drivers
• MongoDB Shell
• MapReduce Paradigm and MongoDB
• MongoDB Sharding
• Configuration Parameters
• File Based Configuration